Lean Managed Switch
7278_en_04 PHOENIX CONTACT 1-1
1 Lean Managed Switch
1.1 Properties
The Lean Managed Switch (LMS) is an Ethernet switch, which is suitable for industrial use.
The LMS has five, six or eight ports, various versions available:
– FL SWITCH LM 5TX with five RJ45 ports
– FL SWITCH LM 8TX(-E) with eight RJ45 ports
– FL SWITCH LM 4TX/FX with four RJ45 ports and one FX port (multi-mode)
– FL SWITCH LM 4TX/FX ST with four RJ45 ports and one FX port (multi-mode) in ST
format
– FL SWITCH LM 4TX/FX SM with four RJ45 ports and one FX port (single-mode)
– FL SWITCH LM 4TX/FX ST SM with four RJ45 ports and one FX port (single-mode) in
ST format
– FL SWITCH LM 4TX/2FX(-E) with four RJ45 ports and two FX ports (multi-mode)
– FL SWITCH LM 4TX/2FX ST with four RJ45 ports and two FX ports (multi-mode) in ST
format
– FL SWITCH LM 4TX/2FX SM(-E) with four RJ45 ports and two FX ports (single mode)
– FL SWITCH LM 4TX/2FX SM ST with four RJ45 ports and two FX ports (single mode)
in ST format
Figure 1-1 Some versions of the Lean Managed Switch
Future-proof networks for the highest possible requirements
Maximum availability Maximum network availability
A device design that does not use a fan, the redundant power supply, and conformance with
all relevant industrial standards in terms of EMC, climate, mechanical load, etc. ensure the
highest possible level of availability.
To Next Page
Loading...
