53
5277A
Display Description Remedy
0BF0
and
0BF6
Data transmission was temporarily interrupted. The error can be found in:
- the preceding bus segment of a local bus.
- the preceding bus segment of a ST compact station.
- the bus segments of a preceding remote bus branch.
- the bus segment of the indicated INTERBUS device.
Cause: a) Voltage reset of a device in the specified area. b) The bridge (RBST or LBST) in the connector for the out-
going bus is defective in the specified area.
0BF1 Data transmission is interrupted at a bus terminal module (BK). Cause: a) The connector for the branching remote bus
branch has not been plugged in. b) Defective bridge (LBST) in the connector for the branching remote bus branch.
0BF2 Data transmission is interrupted at a bus terminal module (BK). Cause: a) The connector for the outgoing remote bus
branch has not been plugged in. b) Defective bridge (RBST) in the connector for the outgoing remote bus .
0BF3 Data transmission is interrupted at a bus terminal module (BK), a local bus device or within an INTERBUS compact
station. Local bus:
- Cause: a) The connector for the outgoing local bus has not been plugged in. b) The bridge (RBST or LBST) in the
connector for the outgoing local bus is defective.
ST compact station:
- Cause: a) The ST cable has not been plugged in. b) The RBST connection led via the next module of the IB ST
compact station is interrupted.
To Next Page
Loading...
