20 21
5 Getting started
5.1 Switching on and o 5.2 Wake / Sleep
To turn the Roger Touchscreen Mic on or o, press the
On/O button, on the right side of the device, for
3 seconds. The indicator light blinks green once the
microphone is on.
Sleep puts the microphone’s display to sleep, saving its
battery and preventing anything from happening if the
screen is touched. The microphone sleeps (locks itself)
automatically if you do not touch the display for a set
period of time (customize this time via Settings > Display
> Screen saver).
To wake or sleep the Roger Touchscreen Mic, press the
On/O button for 1 second.
To turn o the microphone, press and hold On/O button
until a pop-up window appears on the screen. Follow
instructions in this window.
> 3s
1s
To Next Page
Loading...
