30 31
6.2 Languages
6.3 How to adjust Roger Earpiece volume
6.4 How to adjust Roger Earpiece volume in
a Multi-Talker Network (MTN)
Use this menu to adjust the microphone’s settings. Some
menu options appear grey until used.
How to use it:
• Sets the microphone’s interface language.
• Tap Settings > Languages
• Select your preferred language in the menu
To adjust the output volume of all Roger Earpiece devices
in range of a Roger BaseStation MTN, turn the volume
control knob on the Roger BaseStation front panel. To
increase the volume, turn the rotary knob clockwise.
The volume setting of a Roger Earpiece can be adjusted
individually thanks to the EasyGain function available
from any Roger Touchscreen Mic.
• Ensure only one Roger Earpiece is located within 10 cm
/ 4 inches of Roger Touchscreen Mic.
• Select Settings > Roger receiver settings.
• Select EasyGain level and press + or – to adjust the
volume of Roger Earpiece.
Each +/– step represents a change in gain of 2 dB (up to
a maximum 8 dB higher or lower than the middle setting).
Warnings
• The EasyGain setting will only act on a Roger Earpiece
which is within the 10 cm / 4 inch Roger Touchscreen
Mic range.
• To change another Roger Earpiece’s EasyGain settings,
return to the settings menu and select Settings > Roger
receiver settings when the new Roger Earpiece is within
10 cm / 4 inches of the Roger Touchscreen Mic.
To Next Page
Loading...
Need help?
General