34 35
To change another Roger Earpiece’s Name or EasyGain
settings, return to the settings menu and select
Settings > Roger receiver settings when the new Roger
Earpiece is within 10 cm / 4 inches of the Roger
Touchscreen Mic.
Check a Roger Earpiece’s information
Ensure only one Roger Earpiece is located within 10 cm /
4 inches of Roger Touchscreen Mic:
• Select Check icon
• Among dierent information, the following parameters
can be read: Name / Device type / Serial number
6.6 Display settings
Adjusts the following screen settings:
Brightness
How to use it:
• Select Settings > Display > Brightness
• To increase brightness, tap +
• To decrease brightness, press –
Screen saver (duration before screen turns o)
How to use it:
• Select Settings > Display > Screen saver
• Select activation time required
• Default activation time is 30 seconds.
6.7 Reset
This function wipes the microphone’s session memory,
including Quick Menu settings (section 9.6).
How to use it:
• Press and hold On/O and Mute buttons
simultaneously for at least 8 seconds
• Indicator light will blink green and microphone will
automatically reboot (turn o and on again)
>8s
To Next Page
Loading...
Need help?
General