wlan
37
Initially, the "Search" eld will display on-screen. After conrmation with the
OK button, the next window will ask if the throttle should connect directly
with the command station via "FastConnect" or whether it should connect
from a list of available Wi-Fi devices.
Here you can choose between "FastConnect" to an activated command
station or "List" to show available Wi-Fi networks.
To select "FastConnect", highlight the eld with the OK button. A message
now appears saying "Transfer access data". Please wait for this to clear and
then follow the instructions in the display.
Answer this query with "Yes". If "No" is selected, use the "left" navigation
button to navigate to the "Yes" eld and conrm with the OK button.
Press and hold the "II" button on the SmartBox until the "Run" and "Stop/
Fail" LEDs ash in-synch. Answer “Yes” to the query within approx. 30
seconds.
The connection is established when the two LEDs on the command station
stop ashing and the active Wi-Fi symbol appears on the display.
If an available Wi-Fi device other than the SmartBox Wi-Fi is to be selected,
then scroll to the "List" entry and conrm with the OK button. Now all
accessible Wi-Fi devices are displayed. This list also contains the desired
SmartBox, which is now selected using the "up" or "down" navigation
buttons and conrmed with the OK button.
To Next Page
Loading...
