PIKO 55821 - System Properties

wlan
5
PIKO SmartControl
wlan
is a Digital Command Control (DCC) system designed for model railroaders of
all skill levels. It consists of the PIKO SmartController
wlan
hand held throttle and the
PIKO SmartBox
wlan
command center which are connected to each other via WiFi.
The
PIKO SmartControl
wlan
lets you control DCC-equipped locomotives and cars as well as
accessories like turnouts and signals. It also allows the operator to program train routes so that
turnouts and signals are automatically aligned for a particular train routing.
The
PIKO SmartBox
wlan
serves as the heart of the PIKO SmartControlwlan system. Clearly labeled
buttons and ports make for trouble-free operation while colored LEDs give you a quick overview of the
system status.
The PIKO SmartController
wlan
is a state-of-the-art wireless handheld throttle for the
PIKO SmartControl
wlan
system. Up to four SmartControllers can be used simultaneously on a
single PIKO SmartBox
wlan
. The ergonomic shape of the PIKO SmartController
wlan
is designed
to sit perfectly in the average hand. The buttons and keypad are arranged such that everything can be
controlled with one hand; whether for right-handed or left-handed individuals.
System attributes
• Up to 16 locomotives can be controlled individually or as part of a consist. An almost unlimited
number of locomotives can be managed on the SD card*.
• The PIKO SmartControl
wlan
is RailCom Plus
®
compatible, so all locomotives and rolling stock
equipped with RailCom Plus decoders will automatically register with the system when placed on
he track.
• The PIKO SmartBox
wlan
supports the 14, 28 and 128 speed step format.
• The data format can be set individually for all locomotive addresses.
• Up to 69 functions can be activated for each locomotive address.
• The system allows up to 128* accessories with addresses ranging from 1 to 2048.
• The PIKO SmartControl
wlan
system features a route memory for up to 18* di󰀨erent train routes.
Nine di󰀨erent turnouts and signals can be programmed for each route.
• Each route can have any accessory from address 1 – 2048 programmed into it along with pause
times for accessories.
• The command station delivers a 2 A output to the main track and features short circuit and
overload protection. This enables multi-train operation of up to 5 trains (depending on the gauge)
without having to use additional boosters.
• The PIKO SmartBox
wlan
has a separate programming track output. When programming on the
programming track, the main track output is switched o󰀨.
• The PIKO SmartControl
wlan
supports both a programming track as well as Programming on the
Main (POM and XPOM).
• PIKO SmartDecoders from version XP 5.1 and upwards can be updated with the SmartControl.
• All PIKO SmartControl
wlan
components can be updated.
• The PIKO SmartControl
wlan
can be operated via Wi-Fi in AccessPoint mode (the system’s self
contained Wi-Fi network), or by integrating the system into an existing home network in Station
mode.
* Start Set versions of the PIKO SmartControl
wlan
allow a maximum of 16 locomotives, 54 accessories, and 3 train routes
with 6 switching commands. Programming can only take place on the programming track. Start Set SmartControl
systems can be upgraded to the full SmartControl system..