PIKO 55821 - 3.8.8 Settings menu of the SmartBox (command station)

System
wlan
42
If you begin an online search without activating Station Mode, a message
will appear on the display saying "SmartBox not in StationMode".
If your update is successful, a message will appear saying "Updates are
being downloaded". The updates will be saved to the SD card and displayed
in the "Firmware" menu, where they can be installed.
The serial numbers: This submenu shows the serial numbers of the
PIKO SmartBox
wlan
(55825B) and the PIKO SmartController
wlan
(55823). This information is useful for service purposes.
3.8.8 Settings menu of the SmartBox (command station)
To set parameters for the SmartBox, press button 8 while in the Settings
menu or navigate to this eld and activate it with the OK button.
The rst menu option deals with the general settings of the SmartBox.
Highlight it (if it is not already highlighted) and conrm your choice by
pressing the OK button. This will take you to it’s submenu.