PIKO 55821 - Page 39

wlan
39
In this eld, the Controller name can be changed as you wish. To do this,
activate the Name eld with the OK button. Then enter the new name using
the “telephone keypad”.
Once the name has been entered and conrmed with the OK button, save
the new name in the Controller via the "Save" eld. The window then returns
to the general setting options.
In the submenu that follows, you can set the throttle’s Wi-Fi transmission
power.
A range of values from 0 (low) to 10 (maximum) can be chosen here.
Select the menu to activate the input eld by using the OK button and enter
the desired value between 0 and 10 and then conrm it with the OK button.
Finally, save this change via the "Save" eld in the display.
The window then returns to the general setting options.
You can assign a four-digit PIN number to the SmartController to protect
sensitive data input, or to limit the throttle’s applications (a child safety lock).
Select the “edit PIN” submenu to enter a PIN.
The factory-assigned PIN (0000) will be displayed on top of the solid red
eld while the new PIN is entered in the lower part of the solid red eld. The
new PIN is entered using the keypad and then conrmed with the OK
button. Incorrect entries can be deleted using the "left" navigation key.
If you want to leave the menu without making any changes, the "back"
button will take you back to the settings menu.