Pilz PITreader - Page 49

Operation
Operating Manual PITreader, PITreader Firmware V1.5.x
1004806-EN-08
| 49
– Duration (median)
This column contains the time that a transponder key is inserted, calculated from a
"median" perspective.
-For format of time display see [1]
-Definition of "Median" see [2]
– Successful authentication
This column contains the sum of all successful authentication attempts made by the
transponder key.
– Failed authentication
This column contains the sum of all failed authentication attempts made by the
transponder key.
Note:
Log entries that contain no security ID in the parameters due to the personal data logging
setting are ignored in the statistical evaluation; i.e. the table under Transponder contains
no entries for transponder keys that have no information in the Security ID column.
} Authenticated permission area
The table under Authenticated permission only lists the permissions that have been
used at least once for a successful authentication.
Statistical values for a permission:
– Permission
This column contains the authenticated permission as a value between 0 and 64.
– Quantity
The value in this column indicates how often a permission has been used for a suc-
cessful authentication.
– Duration (total)
This column contains the calculated total time for which the permission was active in
the device.
-For format of time display see [1]
– Duration (median)
This column contains the time for which the permission was active in the device, cal-
culated from a "median" perspective.
-For format of time display see [1]
-Definition of "Median" see [2]
Note:
If a transponder key is removed and re-inserted within a maximum of 2 s, then this is not
evaluated as a new authentication in the statistics.