Operate the external unit
by using “Function1”—
“Function4”
The external unit can be operated by transmit-
ting the operating commands set to
Function1 — Function4.
1 Display the “Function Menu” screen.
= For details, refer to Screen switching over-
view on page 70.
2 Turn MULTI-CONTROL until the desired
setting appears in the display.
3 Press the center of MULTI-CONTROL to
set.
p The operating commands set to Function1
— Function4 vary depending on the exter-
nal unit.
p Some functions may not be used until you
touch and hold the key.
Using the external unit (EXT1, EXT2)
En
101
Chapter
23
Using the external unit (EXT1, EXT2)
To Next Page
Loading...
