2 Turn MULTI-CONTROL to display
“Seek Mode ”.
3 Press the center of MULTI-CONTROL to
switch between “Seek All” and “Seek HD”.
! “Seek All”:
Seeks stations from both analog and digital
broadcasting.
! “Seek HD”:
Seeks from digital broadcasting only.
p If you select “Seek HD” on this setting
while “Blending” is set to “Off”, the setting
on “Blending” turns to “On” auto-
matically.
Switching the reception mode
If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
in default. If you want to prevent a frequent
automatic switching, switch this setting to
“Off”.
1 Display the “Function Menu” screen.
= For details, refer to Screen switching over-
view on page 70.
2 Turn MULTI-CONTROL to display
“Blending”.
3 Press the center of MULTI-CONTROL to
switch between “On” and “Off”.
! “Off”:
Receives analog broadcasting only.
! “On”:
Automatically switches to the analog broad-
cast of the same frequency level as the digi-
tal broadcast.
is displayed as the blending mode indi-
cator.
p If you select “Off” on this setting while
“Seek Mode” is set to “Seek HD”, the set-
ting on “Seek Mode” turns to “Seek All”
automatically.
Using the HD Radio (Digital Radio)
En
78
Chapter
16
To Next Page
Loading...
Need help?
General
