Exporting data for “AVIC
FEEDS”
You can export data to an SD memory card for
browsing on the PC application.
The following data can be exported.
! Gas Mileage
! Drive Log
Gas Mileage
Entering the fueling information
p Up to 24 sets of “Gas Mileage” entries can
be stored. You can also export the data, as
described below.
If the entries reach the maximum number,
a new entry will overwrite the oldest one.
Gas Mileage function only assists you to cal-
culate your average mileage based on the in-
formation you input. The function does not
receive data directly from the vehicle.
1 Display the “Navigation Menu” screen.
2 Touch [Gas Mileage].
The “Gas Mileage” screen appears.
3 Touch [Gas Price].
The “Gas Price Calculation” screen appears.
4 Enter the following settings:
! [Distance]:
Enter the distance traveled since the pre-
vious fueling.
p The distance is entered automatically
only when the distance traveled since
the previous fueling is recorded.
! [Gas Pumped]:
Enter the amount of fuel pumped.
! [Gas Price/Unit]:
Enter the fuel unit price.
When all the items are entered, the fuel con-
sumption is displayed next to “Gas Mileage”.
5 Touch [OK].
The “Gas Price Calculation” screen appears.
And then touch [OK] to display the “Gas Mile-
age” screen.
Exporting the data of “Gas Mileage”
Exporting the “Gas Mileage” data to an SD
memory card is possible.
p The data stored in this navigation system
will be cleared as exporting it to the SD
memory card.
Other functions
En
65
Chapter
12
Other functions
To Next Page
Loading...
Need help?
General
