Setting the volume for
navigation system
The sound volume for the navigation can be
set.
p When using a phone, the sound volume of
the navigation system is dependent on the
phone volume setting.
1 Display the “Navigation Menu” screen.
2 Touch [Settings].
The “Settings Menu” screen appears.
3 Touch [Sound].
The “Sound” screen appears.
4 Touch [+] or [–] next to “Guidance”.
Controls the master volume of both the navi-
gation guidance and beep.
When set to
, guidance is output. When set
to
, no guidance is output.
# Touch [Beep].
Each time you touch the key changes that set-
ting.
! [On] (default):
A beep sounds.
! [Off]:
Muting the beep sound.
Customizing the regional
settings
1 Display the “Navigation Menu” screen.
2 Touch [Settings].
The “Settings Menu” screen appears.
3 Touch [Region].
The “Region” screen appears.
Selecting the language
You can set the languages used on the pro-
gram and voice guidance. Each language can
be set separately.
1 Display the “Region” screen.
2 Touch [UI Language].
The “Select UI Language” screen appears.
3 Touch the desired language.
After the language is selected, the screen re-
turns to the previous screen.
4 Touch [Voice Language].
The “Voice Language Selection” screen ap-
pears.
5 Touch the desired language.
After the language is selected, the screen re-
turns to the previous screen.
6 Touch [OK] on the “Region” screen.
The navigation system restarts.
Installing additional files for
voice guidance (TTS files)
TTS file is used to read out the street name in
the route guidance by navigation system. If
the latest TTS file is available, you can replace
the current TTS file with the latest one.
1 Copy the “Voice” folder onto the top-
most directory of the SD memory card.
The “Voice” folder is stored on the supplied
CD-ROM. Use your PC to copy it.
Modifying the general settings for navigation functions
En
59
Chapter
11
Modifying the general settings for navigation functions
To Next Page
Loading...
Need help?
General
