Searching for nearby phones
The system searches for available cellular
phones near the navigation system, displays
them in a list, and registers them for connec-
tion.
1 Activate the Bluetooth wireless tech-
nology on your cellular phone.
For some cellular phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your cellular phone.
2 Touch [Settings] on the “Phone Menu”
screen.
The “Bluetooth Settings” screen appears.
3 Touch [Connections].
The “Connection List” screen appears.
4 Touch [Add], and then [Search devices].
The system searches for cellular phones fea-
turing Bluetooth technology that are waiting
for the connection and displays them in the
list if the device has found.
p Up to 15 cellular phones will be listed in the
order that the cellular phone is found.
5 Wait until your cellular phone appears
in the list.
p If you cannot find the cellular phone you
want to connect, check that the cellular
phone is waiting for the Bluetooth wireless
technology connection.
6 Touch the cellular phone name you
want to register.
A message prompting you to enter a PIN code
appears.
7 Enter the PIN code “1111” using the cel-
lular phone.
When a connection is successfully estab-
lished, a connection complete message ap-
pears, the screen returns to the “Bluetooth
Settings” screen by touching [OK].
Searching for a specified phone
If you cannot connect your phone using
[Search devices] and [Pair from the mobile
phone], try this method if your phone is found
in the list.
Using hands-free phoning
En
47
Chapter
10
Using hands-free phoning
To Next Page
Loading...
Need help?
General
