Setting up a route to your
home
If your home location is stored, the route
home can be calculated by touching a single
key.
1 Display the “Navigation Menu” screen.
2 Touch [Go Home].
If the home location has not been stored yet,
the confirmation message appears.
# Touch [Register].
The “Set Home” screen appears.
= For details, refer to Registering and editing
your home on page 43.
Searching for Points of
Interest (POI)
Information about various facilities (Points Of
Interest - POI), such as gas stations, parking
lots or restaurants, is available. You can
search for a POI by selecting the category (or
entering the POI Name).
1 Display the “Navigation Menu” screen.
2 Touch [POI].
The “POI Search” screen appears.
Searching for a POI directly
from the name of the facilities
1 Display the “POI Search” screen.
2 Touch [Spell Name].
The “POI Name Input Menu” screen appears.
3 Touch [Zone].
The “State/Province Selection” screen ap-
pears.
If the location that you want to search for is in
another state, province, or territory, this
changes the area setting.
p Once the state, province, or territory has
been selected, you only have to change
states, provinces, or territories when your
destination is outside of the state, province,
or territory you selected.
4 Touch [Name].
The “POI Name” screen appears.
5 Enter the POI name and then touch
[OK].
The “POI Name Input Menu” screen appears.
p You can search for a POI name by keyword.
= For details, refer to Searching for a name
by entering multiple keywords on the pre-
vious page.
6 Touch [Search].
The “POI List” screen appears.
7 Touch the POI you want.
The searched location appears on the map
screen.
# Touch [Sort].
Each time you touch [Sort] changes the sort
order.
Searching for and selecting a location
En
38
Chapter
08
To Next Page
Loading...
Need help?
General
