114
PDP-433CMX
1234
C
D
F
A
B
E
1
23
4
Command Name Function
RS-232C
Factory
RS-232C
Integrator
Normal
Validity
Direct
Validity
UP/DOWN
Validity
M
MCY MASK CONTROL YES To permit automatic mask display position setting O O −− −
MCN MASK CONTROL NO To release automatic mask display position setting O O −− −
N
NMY NEGATIVE MODE YES To turn the inverse mode (negative positive inverting) to ON O O −− −
NMN NEGATIVE MODE NO To turn the inverse mode (negative positive inverting) to OFF O O −− −
NTS COLOR SYSTEM NTSC To set the COLOR SYSTEM setting to NTSC O O −− −
NT4 COLOR SYSTEM 4.43NTSC To set the COLOR SYSTEM setting to 4.43NTSC O O −− −
NRN DIGITAL NR OFF To set the DIGITAL NR setting to OFF O O −− −
NRL DIGITAL NR LOW To set the DIGITAL NR setting to LOW O O −− −
NRM DIGITAL NR MIDDLE To set the DIGITAL NR setting to MIDDLE O O −− −
NRH DIGITAL NR HIGH To set the DIGITAL NR setting to HIGH O O −− −
O
OFY OFFSET YES To set the OFFSET adjustment mode to ON O −−− −
OCY FIELD OFFSET CHANGE YES To set the field AB offset to ON O −−− −
OCN FIELD OFFSET CHANGE NO To set the field AB offset to OFF O −−− −
OMY ORBITER MODE YES To set the orbiter mode to ON O O −− −
OMN ORBITER MODE NO To set the orbiter mode to OFF O O −− −
P
PAF ACL SW OFF To set the ACL SW to OFF O −−− −
PAL COLOR SYSTEM PAL To set the COLOR SYSTEM setting to PAL O O −− −
PAN ACL SW ON To set the ACL SW to ON O −−− −
PCY
PC RGB YES
To set the INPUT setting to PC: RGB (VGA or XGA) O O −− −
PCA
PC AUTO
To set the INPUT setting to PC AUTO (auto) O O −− −
PWY PC WIDE YES To set the INPUT setting to PC: RGB (WVGA or WXGA) O O −− −
PLN BRIGHT ENHANCE OFF To set the center brightness correction function to OFF O O −− −
PLY BRIGHT ENHANCE ON To set the center brightness correction function to ON O O −− −
PMS PULSE METER SET To set the pulse meter O −−O −
PMD PULSE METER DISP To display the pulse meter O −−− −
PMY COLOR SYSTEM PAL-M To set the COLOR SYSTEM setting to PAL-M O O −− −
PNY COLOR SYSTEM PAL-N To set the COLOR SYSTEM setting to PAL-N O O −− −
PON POWER ON Power ON −−O −−
POF POWER OFF Power OFF O O O −−
PT0 PANEL COLOR TEMP0 Panel color temperature 0 (REFERENCE value) O −−− −
PT1 PANEL COLOR TEMP1 Panel color temperature 1 O −−− −
PT2 PANEL COLOR TEMP2 Panel color temperature 2 O −−− −
PSN
AUTO POWER OFF
OFF POWER MANAGEMENT
To set the AUTO POWER OFF / POWER MANAGEMENT
setting to OFF
OO−− −
PS1 AUTO POWER OFF ON To set the AUTO POWER OFF setting to ON O O −− −
PS2 POWER MANAGEMENT ON To set the POWER MANAGEMENT setting to ON O O −− −
PUN PURECINEMA OFF To set the PURECINEMA to OFF O O −− −
PUS PURECINEMA STANDARD To set the PURECINEMA to STANDARD O O −− −
PUH PURECINEMA HQ To set the PURECINEMA to HQ (HIGH QUALITY) O O −− −
PWN
POWER CONTROL
STANDARD
To set the power control to OFF (STANDARD mode) O O −− −
PWL CONTROL MODE1 To set the power control to MODE1 (Power-saving mode) O O −− −
PWS POWER CONTROL MODE2 To set the power control to MODE2 (Longevity life mode) O O −− −
PDF PICTURE DEFAULT To execute PICTURE DEFAULT O −−− −
R
RFY REFERENCE YES To enter reference adjustment mode O −−− −
S
SCM COLOR SYSTEM SECAM To set the COLOR SYSTEM setting to SECAM O O −− −
STD STANDARD W/B
To reset the PIC and W/B of integrator to factory default values
− O −− −
SM0 SCREEN MODE 0 To set the screen size to DOT BY DOT O O O −−
SM1 SCREEN MODE 1 To set the screen size to 4:3 O O O −−
SM2 SCREEN MODE 2 To set the screen size to FULL O O O −−
SM3 SCREEN MODE 3 To set the screen size to ZOOM O O O −−
SM5 SCREEN MODE 5 To set the screen size to WIDE O O O −−
SLY STILL YES To set the STILL setting to ON O O O −−
SLN STILL NO To set the STILL setting to OFF O O O −−
T
TVA COLOR SYSTEM AUTO To set the COLOR SYSTEM setting to AUTO O O −− −
V
VFY VIDEO FULL DISPLAY YES To start 100% display −−O −−
VFN VIDEO FULL DISPLAY NO To finish 100% display −−O −−
VRO VARIABLE OUTPUT To set the audio output to variable O O −− −
Y
YCM 3S Y/C MOTION To set the 3D Y/C setting to MOTION O O −− −
YCS 3D Y/C STILL To set the 3D Y/C setting to STILL O O −− −
To Next Page
Loading...
Need help?
General