Do you have a question about the Pioneer XV-E51 and is the answer not in the manual?
Number of Channels | 5.1 |
---|---|
HDMI Output | Yes |
Optical Digital Input | Yes |
Surround System Class | 5.1 channel |
Radio System | FM |
Bluetooth | No |
FM Tuner | Yes |
Frequency Response | 20Hz - 20kHz |
DVD player type | DVD player |
Media type | CD, DVD |
Audio output mode | Dolby Digital, DTS |
Built-in decoders | Dolby Digital, DTS |
Tuner Frequency Range | 87.5MHz - 108MHz |
Details about laser diode power and wavelength for DVD and CD.
Explanation of the laser interlock mechanism and its operation.
Guidelines for safe servicing procedures and regulatory compliance.
Technical specifications for amplifier, disc playback, and cassette deck.
Overview of the system's block diagram.
Wiring diagram for the media part of the system (Part 1).
Wiring diagram for the media part of the system (Part 2).
Procedures for adjusting the deck section of the unit.
Conditions and requirements for performing deck section adjustments.
Adjustments related to the playback function of the deck.
Adjustments related to the recording function of the deck.
Procedure to confirm/adjust tape speed and head azimuth for optimal playback.
Procedure to adjust playback level, critical for Dolby NR.
Procedure to adjust recording bias and level for optimal distortion and playback.
Steps to adjust the FM tuner section.
List of adjustment items for the DVD section (mechanism & electrical).
Specific points for mechanism adjustments in the DVD section.
Adjustment points when replacing pickup, traverse mechanism, or spindle motor.
Procedures to turn on test mode and set the disc for testing.
Procedures for playing a disc and searching specific addresses in test mode.
Procedure to turn off the test mode.
Procedure for coarse adjustment of tangential and radial height.
Information and procedures for diagnosing system issues.
Detailed specifications and functions of the test mode.
Explains shortcut key functions available during normal playback.
Details the indications shown in service mode, including error rates and model info.
How to perform and interpret self-diagnostic tests.
Steps for power-on issues and standby indicator blinking errors.
Steps for no audio or video output issues.
Steps for tray opening, spindle, and playback stop issues.
Steps for picture disturbances and no audio output.