Pipistrel Sinus - Page 41

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Now begin removing the extra epoxy resin that has been squeezed out from between the
container and fuselage (on both sides!). Once it has all been removed, use it again to
touch up the fixation room between the fuselage and container. This will make the
fixation a little stronger and prevent any cracks or airbubbles from building up.
 Stuff a little of the leftover normal epoxy resin around the containers base for extra
holding strength.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 41 of 267