Pipistrel Sinus - Preparing the Fuselage

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
Materials
Here is a list of materials that you will definitely need when making your Pipistrel aircraft:
Loctite 243
Loctite 262
Sheets of plastic for masking while painting (3M
Painter's Masking Tape Pre-Taped Drop Cloth is highly
recommended)
Grease (SKF bearing grease or Xintex)
Silicon (black if possible)
WD-40
Sandpaper (80 and 100 granulation)
Electrical tape
Two-sided tape
Rubber gloves
Preparing the Fuselage
 Support the fuselage on a suitable stand and support the rudder on a piece of foam to
protect it from damage.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 5 of 267