Feeding envelopes
Your SendPro C Auto can automatically feed a stack of envelopes.
Before you begin
l
All envelopes in a single stack must be the same width and thickness.
l
All envelopes in a single stack must be sealed or unsealed. Mixing sealed and unsealed
envelopes in a stack will cause a jam in the moistener.
Insert the envelopes into the feeder
1. Slant the stack of envelopes as shown so the bottom envelope feeds first.
2. Place the stack of mail on the feed deck. Place the envelopes with the flap side facing down and
the top edge against the rear wall.
11 • Feeding and Jamming
Pitney Bowes User Guide March 2023 121
To Next Page
