Setting up a Proxy server using a wired network connection
1. Tap Settings.
2. Tap Wired (Ethernet) in the Device & Network section.
3. Select either DHCP or Static IP.
4. If you select DHCP, tap on the drop-down arrow next to Proxy Setting and select Manual.
5. Enter the IP address, HTTP or HTTPS proxy address of your proxy server in the Proxy
Hostname field.
6. Enter the port number for the proxy server in the Proxy Port field.
7. (Optional) Enter any specific URLs or URLpatterns (such as internal addresses) that you wish
to bypass the proxy in the Bypass field.
8. If your Proxy Server requires authentication, select the Need Authentication check box.
Additional fields appear.
a. Enter the Proxy username in the Proxy Username field. This may be case sensitive for
some proxy servers.
b. Enter the Proxy password in the Proxy Password field. This is case sensitive for proxy
servers.
2 • Connectivity
Pitney Bowes User Guide March 2023 30
To Next Page
Loading...
