To Next Page

To Previous Page

1080p SIP Vandalproof Door Phone with RFID and PoE

HDP-1261PT

Enable Missed Call

Log

If enabled, the phone will save missed calls into the call history

record.

DTMF Type

Set the DTMF type to be used for the line

Use VPN

Set the line to use VPN restrict route

Use STUN

Set the line to use STUN for NAT traversal

Enable Failback

Whether to switch to the primary server when it is available.

Failback Interval

A Register message is used to periodically detect the time interval

for the availability of the main Proxy.

Signal Failback

Multiple proxy cases, whether to allow the invite/register request

to also execute failback.

Signal Retry Counts

The number of attempts that the SIP Request considers proxy

unavailable under multiple proxy scenarios.

Codecs Settings

Set the priority and availability of the codecs by adding or remove

them from the list.

Advanced Settings

Use Feature Code

When this setting is enabled, the features in this section will not

be handled by the device itself but by the server instead. In order

to control the enabling of the features, the device will send feature

code to the server by dialing the number specified in each feature

code field.

Enable Blocking

Anonymous Call