Internet Telephony PBX System
IPX-330/IPX-2100
69
3.5.9.2 Configure From the Phone
Navigate to web menu Advanced->Feature Codes.
You’ll see feature codes for call forward as follows:
With these feature codes, you can activate or deactivate call forward directly from your phones
without the need to configure on the Web GUI.
For example, the IP PBX requires prefix 9 to call outbound, and the number you want to
forward the calls to is 86547096.
Activate always call forward: Dial *71986547096, press 1 to confirm.
Deactivate always call forward: Dial *071.
Activate call forward on busy: Dial *72986547096, press 1 to confirm.
Deactivate call forward on busy: Dial *072.
Activate call forward no answer: Dial *73986547096, press 1 to confirm.
Deactivate call forward no answer: Dial *073.
3.5.9.3 Call Transfer
Call Transfer is used to transfer a call in progress to some other destination. There are two
types of call transfer.
z Attended call transfer - Where the call is placed on hold, a call is placed to another party,
and a conversation can take place privately before the caller on hold is connected to the
new destination. It is also called "Supervised Call Transfer".
z Blind call transfer - Where the call is transferred to the other destination with no
intervention (the other destination could ring out and not be answered for instance).
Navigate to web menu Advanced->Feature Codes. You’ll see the feature code for call transfer
as below:
Item Explanation
Blind Transfer In a live call, extension user can press # key and the IP PBX
system prompts “Transfer”, then you enter the number to be
To Next Page
Loading...
