User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-113-
Step 11. Use command line tool to ping each other to ensure the link is successfully established.
From Site-1, ping 192.168.1.200; and in Site-2, ping 192.168.1.100.
The following hints should be noted:
1) The encryption method must be the same as that of both sites if configured.
2) Both sites should be Line-of-Sight.
3) For the short distance connection less than 1m, please reduce the "RF Output Power" of both
sites.
4) For the long distance connection over 1m, please adjust the "Distance" to the actual distance
or double the actual distance.
To Next Page
Loading...
Need help?
General
