Planet WDAP-C7210E - Log; Setup System Time

User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-79-
The page includes the following fields:
Object Description
System Time
Show system time of device
NTP Enable
Select Enable or Disable NTP function
Time Zone Select
Select time zone
Manual IP Settings
Enable to manual IP setting
NTP Server
Select NTP server
Sync with Host
Press to sync system time with host server
Note: If you want to use any function that needs scheduling, must enable NTP function.
4.7.7.6. Log
Figure 5-56 Setup System Time
The page includes the following fields:
Object Description
Log
Select ON/OFF to record log or not
Remote Log Service
Enable remote log server and enter the server IP address