User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-62-
4.7.4 Advanced
4.7.4.1. Advanced
Figure 5-34 Advanced
The page includes the following fields:
Object Description
2.4G Mode Select 802.11B/G or 802.11N/G in CPE.
5G Mode Select 802.11A or 802.11AN or 802.11AC in CPE.
Maximum 2.4G per AP The maximum users are 64.
Maximum 5G per AP The maximum users are 64.
2.4G WLAN Partition
Enable it to isolate each connected wireless client so that they cannot
access mutually.
5G WLAN Partition
Enable it to isolate each connected wireless client so that they cannot
access mutually.
2.4G Coverage Threshold
The coverage threshold is to limit the weak signal of clients occupying
session. The default is -90dBm.
5G Coverage Threshold
The coverage threshold is to limit the weak signal of clients occupying
session. The default is -90dBm.
2.4G TX Power The range of transmit power is Max (100%), Efficient (75%),
Enhanced (50%), Standard (25%) or Min (12.5%). In case of
shortening the distance and the coverage of the wireless network,
input a smaller value to reduce the radio transmission power.
To Next Page
Loading...
Need help?
General
