User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-46-
Figure 5-20 WISP Mode
The page includes the following fields:
Object Description
Bandwidth Select network for using 2.4G or 5G to do connection.
Repeater SSID Enter the root AP’s SSID or press “Scan” to select.
Lock BSSID
Check to lock the root AP’s MAC address.
Encryption
Select the wireless encryption of root AP.
“WPA/WPA2PSK_TKIPAES”.
Password
Enter the password of root AP.
Bandwidth Select the operating channel width, “20MHz” or “40MHz” or “80MHz”.