User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-88-
Step 4: Enter the encryption key of the wireless AP
(1) The Wireless Network Connection box will appear
(2) Enter the encryption key that is configured in section 5.7.2.1
(3) Click the [Connect] button
Figure 6-3 Entering the Network Key
Step 5: Check if “Connected” is displayed
Figure 6-4 Choosing a Wireless Network -- Connected
Some laptops are equipped with a “Wireless ON/OFF” switch for the internal wireless LAN. M
sure the hardware wireless switch is switched to “ON” position.
To Next Page
Loading...
Need help?
General
