Chapter E - DIMAX3 DIGITAL SYSTEM ADJUSTMENT
E-38 Planmeca Proline CC panoramic x-ray
Technical Manual
5 OTHER PANORAMIC MODE ADJUSTMENTS
The following adjustments are performed according to the instructions given in chapter
“ADJUSTMENT & CALIBRATION” on page D-1.
• PATIENT POSITIONING LIGHTS
Check the lights according to the instructions given in section “Checking the lights” on page
D-19. If necessary, adjust the positioning of the lights according to the instructions given in
section “Positioning light adjustment” on page D-20.
• MECHANICAL ADJUSTMENT OR THE ROTATIONAL PART, refer to section “MECHANI-
CAL ADJUSTMENT OF THE ROTATIONAL PART” on page D-21.
• TIME SETTING, refer to section “SETTING THE CLOCK” on page D-24.
• EXPOSURE WARNING SIGNAL ADJUSTMENT, refer to section “EXPOSURE WARNING
SIGNAL ADJUSTMENT” on page D-25.
To Next Page
Loading...