Plextor PLEXTOOLSPRO - CD-ROM Maker Preferences

Section 4. PlexTools Professional Functions
42 PlexTools Professional Reference Guide
CD-ROM Maker Preferences
Figure 39: CD-ROM Maker Preferences Window
• Character Set:

Specifies whether the ISO 9660, DOS, or ASCII character set should be
used.
• ISO Level:
 Level 1: Specifies that the filename cannot contain more than 8 d-characters,
and the filename extension not more then 3 d-characters.

Level 2: Specifies that the filename cannot contain more than 31 characters.
• Write Joliet File System on CD: When enabled, the Joliet File System will be
written on the CD.
• View Mode: Specifies which character set is shown. The choices are:

Selected Character Set: Uses the selected character set.

Joliet: Uses the Joliet character set.
• Volume Identifier Options: Specifies which type of volume identifier should be
used:
 Default (NEW_VOLUME): Uses the default volume identifier.
 User Defined: Allows selection of the volume identifier by the user.
 Date: Allows selection of date format.
 Time: Allows selection of time format.