Section 4. PlexTools Professional Functions
PlexTools Professional Reference Guide 49
• Always leave disc open: Specifies that a new session is automatically created on
every copy.
CAUTION: This will create a disc that may not be an exact copy of the source
disc. The created disc is multisession-ready, so more sessions can be added.
(Use other CD-recording software for adding sessions.)
• Eject source disc after completion: Causes source disc to be ejected after the
completed copy task.
• Eject destination disc after completion: Causes the recorded disc to be ejected
after the completed copy task.
• Play a sound when finished: When this option is selected, and you have
specified a *.WAV file, the sound will be played after writing is finished.
• Image file: Indicates the location of the image file on your hard disk and also the
free space on the hard disk.
• Use timestamp: When enabled, this setting will show the time for each operation
listed in the progress dialog.
Use actual time: Uses the actual time.
Reset starttime to zero: Resets the starting time to zero.
To Next Page
Loading...