2 General description
2.1 General description
Introduction
The air dryers described in this book are heatless adsorption dryers, designed to remove
humidity from compressed air for industrial applications.
PH dryers are available in a version to reach a pressure dew point down to -20 °C (-4 °F) or down
to -40 ˚C (-40 ˚F) and are equipped with a DC1 electronic controller. A pressure dew point (PDP)
sensor is available as option.
The dryers are designed for indoor use and at altitudes up to 2000 m (6560 ft).
PH 230 with DC1 controller — General view
Main parts
An overview of the main parts of the dryer is given in the image below:
Instruction book
2920 7111 23 11
To Next Page
Loading...
