Text on figure
(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
• Press the Escape key on the controller to go to the main Week Timer menu. Select
Remaining Running Time from the list and press the Enter key on the controller to Modify.
Text on figure
(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
• This timer is used when the week timer is set and for certain reasons the dryer must
continue working. The remaining running time, for example 1 hour, can be set in this screen.
This timer is prior to the Week Timer action.
Text on figure
(1) Week Timer
(2) Week action schemes
(3) Remaining Running Time
Instruction book
2920 7111 23 53
To Next Page
Loading...
