User Guide for the SoundStation IP 7000 Phone
3 - 8
Setting Up Conferences
You can set up a conference in one of two ways:
• Using or the Confrnc soft key.
• Using the Join soft key, if you have an active call and a call on hold.
Setting Up a Conference Using the Conference Key or Soft Key
To set up a conference using the Conference key or soft key:
1. Call the first party. See Placing Calls on page 3-2.
2. Press or the Confrnc soft key to create a new call. The active call is
placed on hold.
The Conference with screen displays.
3. Enter the number of the second party, and then press or the Dial
soft key.
4. When the second party answers, press or the Confrnc soft key
again to join all parties in the conference.
Note
If configured for single key-press conferences, the conference participant hears the
dial tone and ringback when the conference host places the call to the new party.
Note
If configured for single key-press conferences, you do not have to press the
Conference key or the Confrnc soft key again.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
To Next Page
Loading...
Need help?
General
