User Guide for the SoundStation IP 7000 Phone
3 - 14
From the Hold:Conference screen, you can do the following:
• To resume the conference call, press the Resume soft key. The
Active:Conference screen will display again.
• To place a call to a new party, press the New Call soft key. The conference
remains on hold, and the new call becomes the active call.
• To end the conference call and split the conference into two separate calls
on hold, press the Split soft key.
Splitting Conferences
When a conference is established, a Split soft key is available. When you split
a conference, you end the conference and put all parties on hold. The Split soft
key is only available from the Active:Conference screen.
To split a conference:
>>
From the Active:Conference screen, press the Split soft key.
The conference ends, and all calls are split into individual calls and put on
hold.
Ending Conferences
You can end a conference, and your connection to the other parties, by
pressing the End Call soft key. When you use the End Call soft key, the other
parties remain connected.
To end a conference:
>>
From the Active:Conference screen, press the End Call soft key.
The two other parties remain connected.
Transferring Calls
A call can be transferred in one of three ways:
• Consultative transfer—You have the option of either talking to the party
to whom you are transferring the call, or you can choose not to talk to the
party, and complete the transfer when you hear the party’s ring-back
sound.
— Performing a Consultative Transfer on page 3-15.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
To Next Page
Loading...
