Polycom SoundPoint IP 560 User Manual

Using the Basic Features of Your Phone
3 - 13
2. Do one of the following:
— To add a new party, press the Add soft key.
Call another party as you would using or the Confrnc
soft key (outside the conference management feature). The other
parties are put on hold.
After the new party answers, press again to join all
parties in the conference.
— To mute a party, select the party, then press the Far Mute soft key.
The muted party can hear all parties, but no party can hear the muted
party.
If you press instead of the Far Mute soft key, all other parties
can hear each other, but they cannot hear you.
Press the UnMute soft key to un-mute the party.
Note
The Add soft key appears only if you can add more parties to the conference call.
Your system administrator determines the maximum number of conference
participants. The default number is three. For more information, contact your
system administrator

Polycom SoundPoint IP 560 Specifications

Display

display resolution	320 x 160 pixels
display type	backlit grayscale graphical LCD
LED backlight	custom intensity control

Power

power over ethernet	IEEE 802.3af
external power source	48V DC @ 380mA

Operating Environment

operating temperature	+10 to 40°C (+50 to 104°F)
operating relative humidity	20% to 85%, non-condensing
storage temperature	-40 to +70°C (-40 to +160°F)

Weight and Dimensions

dimensions	26.5 cm x 15 cm x 19 cm x 6.5 cm
phone weight	1.1 kg
unit box dimensions	12.5 in x 13.25 in x 3.5 in
unit box weight	1.8 kg