EasyManuals Logo

Polycom SoundPoint IP 560 User Manual

Polycom SoundPoint IP 560
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
User Guide for the SoundPoint IP 550/560 Phone
2 - 6
10. Press to return to the idle display.
Enabling the Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset... > Headset Memory...
3. Use or to select Enabled, and then press the Select soft key.
4. Press to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>>
Press twice.
The flashing headset icon on the graphic display or a flashing headset key
indicates that the headset mode is activated. Pressing or the
Answer soft key to receive a call will now connect to your headset
automatically.

Table of Contents

Other manuals for Polycom SoundPoint IP 560

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom SoundPoint IP 560 and is the answer not in the manual?

Polycom SoundPoint IP 560 Specifications

Display IconDisplay
display resolution320 x 160 pixels
display typebacklit grayscale graphical LCD
LED backlightcustom intensity control
Power IconPower
power over ethernetIEEE 802.3af
external power source48V DC @ 380mA
Operating Environment IconOperating Environment
operating temperature+10 to 40°C (+50 to 104°F)
operating relative humidity20% to 85%, non-condensing
storage temperature-40 to +70°C (-40 to +160°F)
Weight and Dimensions IconWeight and Dimensions
dimensions26.5 cm x 15 cm x 19 cm x 6.5 cm
phone weight1.1 kg
unit box dimensions12.5 in x 13.25 in x 3.5 in
unit box weight1.8 kg

Related product manuals