Polycom Trio Visual+ User Manual

Network
Polycom, Inc. 126
STUN / TURN / ICE Parameters
This section lists parameters that configure the following Microsoft network features:
● Session Traversal Utilities for NAT (STUN)
● Traversal Using Relays Around NAT (TURN)
● Interactive Connectivity Establishment (ICE)
LLDP Parameters
Template Parameter Permitted Values Change Causes Restart or
Reboot
device.cfg,
site.cfg
device.net.lldpFastStart
Count
Configure the fast-start LLDP
packets that the phone sends
when booting up or when the
network comes up.
5 (default)
3 - 10
If fast-start packet count is
configured > 10 the, the value
resets to 10. If the fast-start
packet count is < 3, the value
resets to 3. If you configure
an invalid value-for example,
a negative value, string, or
character-the value resets to
default 5.
No
STUN / TURN / ICE Parameters
Temp l at e Parameter
Temp l at e
Permitted Values Change Causes
Restart or
Reboot
firewall-nat.
cfg
tcpIpApp.ice.password Enter the password to authenticate to the
TURN server.
NULL (default)
No
firewall-nat.
cfg
tcpIpApp.ice.mode MSOCS (default)
Disabled
Standard
No
firewall-nat.
cfg
tcpIpApp.ice.stun.ser
ver
Enter the IP address of the STUN server.
NULL (default)
No
firewall-nat.
cfg
tcpIpApp.ice.stun.udp
Port
The UDP port number of the STUN server.
3478 (default)
1 - 65535
No

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English