Polycom Trio Visual+

Network
Polycom, Inc. 128
firewall-nat.
cfg
tcpIpApp.ice.policy The default policy is set as per the phone
model.
Default (default)
DefaultVVX201
DefaultVVX300
DefaultVVX301
DefaultVVX310
DefaultVVX311
DefaultVVX400
DefaultVVX401
DefaultVVX410
DefaultVVX411
DefaultVVX500
DefaultVVX501
DefaultVVX600
Legacy – Support the legacy behavior of
ICE stack.
Custom – Tune the following ICE
parameters according to network
conditions:
• tcpIpApp.ice.NetworkMode
• tcpIpApp.ice.MaxCandidateGathering
InParallel
• tcpIpApp.ice.MaxConnectivityChecks
InParallel
• tcpIpApp.ice.ConnCheckInetvalPairs
• tcpIpApp.ice.ConnCheckInetvalRetri
es
• tcpIpApp.ice.ReflexiveChecksRequir
ed
• tcpIpApp.ice.MaxRetries
No
firewall-nat.
cfg
tcpIpApp.ice.NetworkMode TCPUDP (default) – Gathers all the
possible UDP and TCP ice candidates.
TCPOnly – Gathers all the TCP candidates
along with UDP host candidates.
UDPOnly - Gathers all the UDP
candidates.
No
STUN / TURN / ICE Parameters
Temp l at e Parameter
Temp l at e
Permitted Values Change Causes
Restart or
Reboot