Polycom Trio Visual+ User Manual

Network
Polycom, Inc. 130
firewall-nat.
cfg
tcpIpApp.ice.ConnCheckIn
etvalRetries
Time interval to serialize the retry attempts
of connectivity check for identified pairs
per call.
50 (default)
25 – 100 ms
The default value for
tcpIpApp.ice.ConnCheckInetvalRetrie
s parameter is set to 100 when using any
VVX platform.
No
firewall-nat.
cfg
tcpIpApp.ice.ReflexiveCh
ecksRequired
To determine whether reflexive candidates
to be collected as part of ice candidates
collection.
1 (default) - TCP and UDP reflexive
candidates will be collected in candidate
gathering process.
0 - TCP and UDP reflexive candidates will
not be collected in candidate gathering
process.
No
firewall-nat.
cfg
tcpIpApp.ice.MaxRetries The maximum number of retry attempts
performed on each ICE connectivity check
pair identified in case of a request timeout
or upon failure.
2 (default)
2 – 24
The default value for
tcpIpApp.ice.MaxRetries parameter is
set to 5 when using any VVX platform.
No
STUN / TURN / ICE Parameters
Temp l at e Parameter
Temp l at e
Permitted Values Change Causes
Restart or
Reboot

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English