Polycom Trio Visual+ User Manual

Video Features
Polycom, Inc. 36
reg-advanced.c
fg
reg.x.fecc.enabled 1 (default) - Enable far-end camera
control for the line you specify with x.
0 - Disable far-end camera control for
the line.
No
features.cfg up.arrow.repeatDelay Choose the milliseconds (ms) an
arrow button must be held before the
arrow starts repeating in the Camera
Controls menu for Polycom EagleEye
IV USB camera.
500 ms (default)
100 – 5000 ms
No
features.cfg up.arrow.repeatRate Choose the milliseconds (ms) between
repeated simulated presses while an
arrow button is being held down. This
applies to the arrows in the Camera
Controls menu for Polycom EagleEye
IV USB camera.
80 ms (default)
50 – 2000 ms
No
video.cfg video.camera.autoWhit
eBalance
0 – Auto white balance is disabled.
1– Auto white balance is enabled and
the value.
No
video.cfg video.camera.backligh
tCompensation
0 – Disable backlight compensation.
1 - Enable backlight compensation.
No
video.cfg video.camera.brightne
ss
Sets the brightness level of the video
stream. The value range is from 0
(dimmest) to 1000 (brightest).
NULL (default)
0 - 1000
No
video.cfg video.camera.contrast Sets the contrast level of the video
stream for all supported USB cameras.
The value range is from 0 (no contrast
increase) to 3 (most contrast
increase), and 4 (noise reduction
contrast).
NULL (default)
0 - 1000
No
features.cfg video.camera.controlS
tyle
Controls whether Polycom EagleEye
IV USB camera pan and tilt is
controlled by directional arrow buttons
or separate pan/tilt sliders.
Simple (default)
No
Video and Camera Parameters
Template Parameter Permitted Values
Change Causes
Restart or Reboot

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English