10 MAN. PS 254 EN – Ind. 2
1.4.3. Technical characteristics
Power input
Three phase +ground
400V - (as an option : multi voltage ; 200 – 460 V)
± 10 % 50 or 60 Hz
Open circuit voltage
105 V
Insulation class
F
Protection class
IP 21 IK04
Welding current range
4 - 250 A D.C.
Duty cycle
250 A / 60 % - 190 A / 100 %
Current resolution
1 % when I ≥ 100 A - 1 A when I ≤ 100 A
Pulse frequency
from 10 to 9999 ms
Movement controls
Direct or pulsed current
Constant or pulsed command of torch rotation
Constant or pulsed wire feed, wire-retract at the end of
the weld
Precision on movements
± 1 %
Gas control
Gas torch with security
second gas (option)
Power source cooling
Forced ventilation
Torch cooling
By water in closed circuit with flow safety valve
Display of real values during cycle
Continuous display:
. of arc voltage
. of welding current
. of impulses of movements
Programs in user memory
16
Display
4 lines of 20 characters, with 8 characters reserved to
the designation of programs
Program sectors
10 maximum
Program library
60
Program storage
On memory card
Auto-diagnostic system
Display of code number
Immediate exploitation
with welding heads :
. tube/plate
. tube/tube MU* - MW - H - K, UHP
. direct use of wire feeder Polyfil
. PO motor mechanised application
Specific functions
Possibility of connecting a manual TIG torch
As an option : possibility of controlling welding heads
with tachometer feedback
Size L x W x H (mm)
890 x 500 x 890
Weight
100 kg
Standard
EN 60974-1/EN 50199
To Next Page
Loading...
