Polysoude PS 254 - The Orbital Welding Heads; The Open Welding Heads; The Tube to Tubesheet Welding Heads

6 MAN. PS 254 EN – Ind. 2
1.2. The orbital welding heads
The PS power sources support most of the
Polysoude orbital welding heads.
1.2.1. The open welding heads
• MU IV type for standard applications and
all weld problems where AVC and
oscillation is required.
• Polycar welding carriage to weld large
diameter pipes.
1.3. The tube to tubesheet welding
heads
• TS heads with different productivity to
meet all requirements.
POLYCAR welding carriage to weld
large diameter pipes.
Microprocessor controlled AVC and
oscillation. Integrated wire feeder.
Possibility to adapt equipment fo
r
distance controlled or mechanised
welding processes.
TS 73 the standard welding head for tube
to tubesheet applications.
Open welding head for protruding, flush o
r
recessed tubes.
POLYFIL external wire feeder.
Wire feeder with four roll linear drive
system to minimise wire deformation and
surface distortion.
External wire feeder.
MU IV AVC/BL with AVC and
oscillation.
Modular design. Microprocesso
r
controlled AVC and oscillation slides,
driven by precision stepper motors.