Polysoude PS 254 - Installation; Input Power Connection

14 MAN. PS 254 EN – Ind.2
Warning Do not move the PS 254 with
a fork-lift truck if it is not
place on its original pallet.
2.2.2. Installation
For safe work the PS 254 has to be placed
horizontally, on a firm surface. In this case a
shaft system ensures the stability of the
machines.
Openings are provided for ventilation of the
power source. To ensure effective cooling of
the system, a minimum distance of 30 cm (12")
should be maintained between these openings
and any surface.
2.2.3. Input power connection
Warning All connections must be
made by a qualified
technician respecting the
safety rules given by law or
quoted in this manual.
 General
The PS 254 is connected to the main power
supply with a cable of 3 conductors + ground,
which comes with the machine (length 3,5 m).
It is essential to connect the ground cable
correctly in order to ensure the safety of the
operators.
Refer to the name plate of your power source
for input power requirements. For example, to
work with an input voltage of 230 V, a 21 A
fuse is required.
Warning It is essential to connect the
ground cable in order to
ensure the safety of the
operators.
Fig. 2.2 : Name plate of the PS 254
multivoltage
Fig. 2.3 : Name plate of the PS 254 single
voltage