Polysoude PS 254 - 1 Introduction; The PS Power Sources

MAN. PS 254 EN – Ind. 2 5
1. INTRODUCTION
1.1. The PS power sources
The power source PS 254 belongs to a
versatile new family of universal and easy to
use orbital TIG power sources. Special
features are:
• Welding sequences entirely programmable
in the language of the welder.
• Ease of use due to an intuitive
programming.
• Integrated program library for quick
welding parameter research.
• Real time monitoring system.
• Integrated printer for documentation of
welds according to the ISO 9000 standard.
• Possibility of storing programs in the
memory of the power source or on 3,5"
disk.
• Modern inverter based power source
technology.
• Mechanised welding with the ease and
comfort of PS power sources.
With a weld current range between 1 A and
350 A and up to six programmable axes the
PS power sources respond to a wide field of
applications:
• Pulsed or continuous weld current.
• Travel speed and wire speed continuous
or with pulsation synchronised to the weld
current.
• With Arc Voltage Control AVC, the welding
of several passes without interruption is
possible.
• Oscillation.
• Programmable mass flowmeter for the
shielding gas.
PS 204
Portable 200 A, single phase
input power source.
Ideal for on site use.
PS 254
Power source 250 A.
Ideal for shop, site and sub-
assembly work.
PS 256
Portable power source 250 A.
Comes with AVC and oscillation.
PS 356
Power source 350 A.
Programming like PS 256.
Universality for all welding needs.