© 2017 PoolPak LLC. All rights reserved. ComPak
®
Series - Installation, Operation and Maintenance | 15
ComPak
®
Series IOM
Features and Options
Standard Items Factory Mounted
• Evaporator (dehumidification) coil
• Air reheat coil (hot gas reheat coil)
• Bottom, top (for indoor installations) or horizontal supply air configuration
• Filters and filter rack
• Air temperature and relative humidity sensor
• Compressor suction and Discharge pressure transducers
• Compressor suction temperature
Standard Items Factory Supplied for Field Installation
• CPCS-PCP control interface device
• Cold surface temperature sensor
• Outside air temperature sensor (with economizer control kit option only)
• Pool water temperature sensor (AW models only)
System Options
• Remote air-cooled condenser for space air conditioning
• Capability of introducing up to 30% outside air
• Economizer control
• Network multiple units
• Remote monitoring via Internet (AWH and HCDH only)
• Weatherproofing for outdoor installation (AWH and HCDH only)
• A factory-mounted water-cooled condenser with a refrigerant head-pressure controlled water regulating valve
for space air conditioning. Chilled water and closed loop cooling tower water may be used for the water-
cooled condenser loop. Never use ground water for the water-cooled condenser. Consult the factory for
cooling tower applications.
To Next Page
Loading...