Potensic ATOM 2 - Page 46

45
•AI QuickShots Activation Requirements:
1) The drone must be airborne and in GNSS mode.
2) An SD card must be inseed with available storage.
3) The batte must be suciently charged.
4) The drone must not be in an automatic ight mode (e.g., RTH, landing, etc.).
•Use AI QuickShots in open, unobstructed areas, and always be aware of people, animals, buildings, or
other obstacles in the ight path.
•If you are unfamiliar with the AI QuickShots ight path, sta with shoer ight distances.
•Be ready to toggle any control stick in an emergency to stop AI QuickShots, at which point the drone
will hover in place.
•Pay attention to objects around the drone and use manual control to avoid collisions or signal
inteerence.
•Avoid using AI QuickShots near buildings or in areas with GNSS signal obstructions, as this may cause
the drone's ight path to become unstable.
•Always adhere to local privacy laws and regulations when using AI QuickShots.
•QuickShots is not available in the following situations:
1) The drone is not airborne.
2) GNSS signal is weak.
3) No SD card is inseed, or the SD card is full.
4) The batte level is low.
5) The ight altitude is insucient.
6) The drone has reached the viual fence.
•DO NOT use AI QuickShots in any of the following situations where the Downward Vision System may
not work properly:
1) When the subject is blocked from view for extended periods or is outside the drone's line of sight.
2) When the subject is more than 50 m away from the drone.
3) When the subject blends in with the surrounding environment in color or pattern.
4) When the subject is airborne.
5) When the subject moves at high speeds.
6) In extremely dark or overly bright environments.
• AI QuickShots does not suppo lming in 1080p@60/50 fps format.
• The gimbal's tilt angle cannot be adjusted while the subject is locked in AI QuickShots.