22
PowerBox-Systems − World Leaders in RC Power Supply Systems
This adaptability provides maximum flexibility and simplicity, and you can immediately check the effect of your settings by using
the linear control. The transmitter control symbol on the left changes color to indicate the switched state.
If you wish to use a switch, you can very easily set the desired switch position to ON. If you select a 3-position switch it is also
possible to set two ON positions. Press OK once you have completed your settings. You are now returned to the Cut-Off func-
tion overview. Under Position set the servo position to which the servo is to move when the transmitter control is operated.
If the assigned transmitter control is set to off, the servo output works as previously defined for that function. As soon as the
transmitter control is moved to the ON position, the servo moves to the previously defined position; you can read off the current
value at far right.
3.8 Flightmodes
Flight modes, also known as flight phases, are one of the CORE’s most powerful features, but they are still easy to use! You can
imagine a flight mode as a copy of a particular model memory, but one with slightly altered settings.
A switch can be used to select different modes when the model is flying. In the simplest case this might simply be a different
landing flap position and the appropriate elevator trim for that position.
The practical advantage of this feature is that you can adjust the trim when the landing flaps are lowered, without altering the trim
in the normal “flight mode”.
When you select the Flight Mode menu you will see a graphic representation of the Flight Mode tree structure.
The most important thing to know at this point is that the CORE prioritizes the flight modes. Priority runs from left to right, i.e. the
flight modes in the left-hand tree diagram have the highest priority, and those on the right the lowest priority. Even when the flight
mode structure is complex, this means that you can, for example, overrule all other switch positions with a single switch, returning
you very quickly to “normal” flight mode..
To Next Page
Loading...