Powtran PI500 series User Manual

Chapter 5 Function parameter
121
Chapter 5
DI status is converted to the decimal number
for display.
y1.18
Reserved
y1.19
Power-on time of the second
fault
Current power-on time of the last fault
●
y1.20
Running time of the second
fault
Current running time of the last fault
●
y1.11 to
y1.12
Reserve
y1.23
Frequency of the first fault
Frequency of the last fault
●
y1.24
Current of the first fault
Current of the last fault
●
y1.25
Bus voltage of the first fault
Bus voltage of the last fault
●
y1.26
Input terminal status of the first
fault
Input terminal status of the last fault, the
order is:
BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI0
When the input terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.27
Output terminal status of the
first fault
Output terminal status of the last fault, the
order is:
When the output terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.28
Reserved
y1.29
Power-on time of the first fault
Current power-on time of the last fault
●
y1.30
Running time of the first fault
Current running time of the last fault
●
BIT4
BIT3
BIT2
BIT1
BIT0
SPB
REL1
Reserve
SPA
REL2

Powtran PI500 series Specifications

General

Brand	Powtran
Model	PI500 series
Category	DC Drives
Language	English